Tekbond Easy Nail has high strength and practicality in fixing parts such as: Frames, panels, baseboards, tiles, decorations, DIY, repair work and Formica sheets for coating furniture.

 

It adheres to various types of substrates such as wood, metal, masonry, plaster, plaster, glass, Cork, brick, stone, granite, tile and some types of plastics (PVC, polycarbonates etc.).

​

 

FEATURES:

It is a water-based adhesive, has no solvents, does not have strong chemical agents, which makes it friendly to the environment.

​

 

MODE OF USE:

-Application surfaces should be cleaned with alcohol or acetone, dry and firm. Do not use kerosene or gasoline to clean surfaces.

-Apply the adhesive in the form of fillets, join the parts and press.

-During gluing we guide the placement of clamps or hooks so that there is no movement of the piece to be glued.

-If the pieces are heavy, use a support (adhesive tape, wedge etc.) until the adhesive completely dries.

-The total cure is 24 to 48 hours depending on the climate, amount of adhesive and weight of the pieces to be fixed.

​

 

LIMITATIONS OF USE:

-For all surfaces that eliminate oil, plasticizers or solvents, such as wood immersed in oil, surfaces when wet, walls with coating in the process of peeling;

-It should not be applied in polystyrene foam material and in plastics: Polyethylene, Polypropylene and Teflon;

-In case of walls that have paint (painting) check the conditions of the same possible peeling, if necessary, make sanding at the application site.

-For surfaces that have direct contact with food.

-Can not be used as structural adhesive.

-It can't be painted.